BNDTC - MULTI-PURPOSE GEAR LUBRICANT NO. 140

  • MSDS: BNDTC
  • Manufacturer: AMOCO OIL CO
  • Product Name: MULTI-PURPOSE GEAR LUBRICANT NO. 140
  • National Stock Number: 9150-00-851-0181
Product Identification

Product ID:MULTI-PURPOSE GEAR LUBRICANT NO. 140
MSDS Date:08/15/1986
FSC:9150
NIIN:00-851-0181
MSDS Number: BNDTC

Responsible Party
AMOCO OIL CO
200 EAST RANDOLPH DR
CHICAGO, IL 60601
US

Emergency Phone: 800-447-8735;800-424-9300(CHEMTREC)

Info Phone: 312-856-3907

Preparer: STEPHEN A. ELBERT

Cage: 15958

Contractor
AMOCO OIL CO
CHICAGO, IL 60601-6401 US

Telephone: 800 447-8735

Cage: 15958

Ingredients

MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (MILD)

CAS: 64742-54-7

RTECS: PY8035500

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5MG/M3;10 STEL(MIST)


PARAFFINIC PETROLEUM OIL)

RTECS: 9999999ZZ


SOLVENT-REFINED RESIDUUM

CAS: 64742-01-4

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE: NO SIGNIFICANT IRRITATION
EXPECTED. SKIN: NONE EXPECTED FOR SINGLE SHORT-TERM EXPOSURES.
PROLONGED OR REPEATED CONTACT MAY PRODUCE SOME IRRITATION. INHAL:
NONE EXPECTED UNDER NORMAL CONDITIONS OF USE. INGEST: EXPECTED TO
BE RELATIVELYNON-TOXIC.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MIN. SKIN:.
FLUSH WITH COPIOUS AMOUNTS OF WATER. CALL MD . INHAL: REMOVE TO
FRESH AIR. SUPPORT BRTHG. (GIVE O*2/ARTF RESP) . INGEST: IF LG A MT
IS SWALLOWED, INDUCE VOMIT. GET MED ATTN.

Fire Fighting

Flash Point Method:COC
Flash Point:400F,204C
Extinguishing Media:AGENTS APPROVED FOR CLASS B HAZARDS (E.G., DRY
CHEMICAL, CO*2, HALOGENATED AGENTS, FOAM, STEAM) OR WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:TREAT AS AN OIL SPILL. CONTAIN AND REMOVE BY
MECHANICAL MEANS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Spec Gravity:0.89
Solubility in Water:NEGLIG, BELOW 0.1%
Appearance and Odor:OILY LIQUID.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH APPLICABLE
FEDERAL, STATE, OR LOCAL REGULATIONS. ENCLOSED-CONTROLLED
INCINERATION IS RECOMMENDED UNLESS DIRECTED OTHERWISE BY APPLICABLE
ORDINANCES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.